MacBookPro
(→Sound Card) |
|||
| Line 56: | Line 56: | ||
== Configuring == | == Configuring == | ||
| + | You can use following settings. Some utils at the end of the file. | ||
| − | .... | + | === Key Settings === |
| + | For Turkish Q Keymap you can use the following Xmodmap configuration; | ||
| + | |||
| + | keycode 116 = ISO_Level3_Shift | ||
| + | keycode 115 = Super_L | ||
| + | keycode 108 = Delete | ||
| + | keycode 49 = less greater NoSymbol NoSymbol bar | ||
| + | keycode 94 = quotedbl backslash | ||
| + | keycode 204 = F13 | ||
| + | |||
| + | Also for shortcuts you can use xbindkeys with the following configuration; | ||
| + | |||
| + | "setkeybright minus" | ||
| + | Mod5 + F9 | ||
| + | |||
| + | "setkeybright plus" | ||
| + | Mod5 + F10 | ||
| + | |||
| + | "setbright minus" | ||
| + | Mod5 + F1 | ||
| + | |||
| + | "setbright plus" | ||
| + | Mod5 + F2 | ||
| + | |||
| + | === AirPort === | ||
| + | With current madwifi you can use the AirPort ver well. But sometimes it gets "''wifi: overrun FIFO errors''"; | ||
| + | |||
| + | '''Workaround :''' | ||
| + | # iwpriv ath0 bgscan 0 | ||
| + | |||
| + | To start at boot add to ''/etc/conf.d/local.start'' | ||
| + | |||
| + | === Sound Card === | ||
| + | To get work your microphone you can use "mbp3" option with snd-hda-intel; edit ''/etc/modules.d/alsa'' and insert | ||
| + | |||
| + | options snd-hda-intel model=mbp3 | ||
| + | |||
| + | and then restart the machine .. | ||
== Utils == | == Utils == | ||
| Line 139: | Line 177: | ||
return 0; | return 0; | ||
} | } | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 20:50, 10 January 2008
This article tries to tell how to install Pardus to MacBook Pro 3rd. (Santa Rosa, Nvidia GPU) gen.
Contents |
Preparation
For installing dual boot with MacOSX and Pardus you can resize your disk and get free spaces for Pardus installation; there is a tool "diskutil" in MacOSX, but don't forget it is not a toy - you can lose your datas -
Getting Disk Informations
$ diskutil resizeVolume disk1s2 limits
For device disk1s2 USB1:
Current size: 99686268928 bytes
Minimum size: 1118990336 bytes
Maximum size: 99686268928 bytes
It shows (with limits option) you can resize your current disk at least 11~GB. So for resizing it as 75GB;
$ diskutil resizeVolume disk1s2 75G Started resizing on disk disk1s2 USB Verifying Resizing Volume Adjusting Partitions Finished resizing on disk disk1s2 USB WARNING: You must now reboot!
After that you must have a 25G free space on your hard drive.
For mulit boot you also need to install a boot manager from your current Mac OSX. You can use rEFIt, follow the instructions on the project site.After installing rEFIt you can use any bootable device (usb-disk,cd-rom etc.) to boot your MacBook Pro.
Installation
Current Pardus Releases (2007, 2007.1, 2007.2) doesn't support this hardware for basic installation; beacuse of new Nvidia card (8600m GT) but you an use "vesa" driver instead of "nv".To do that boot with 2007.2 CD then;
When black screen appears press "Ctrl+Alt+F1" the you should see a terminal screen. Before changing the driver you must stop yali;
# service yali stop
Now you can edit "/etc/X11/xorg.conf" with nano;
# nano /etc/X11/xorg.conf
Change that line below;
Driver "nv"
to
Driver "vesa"
Save and exit and then restart the YALI..
# service yali start
Then installation will begin.. Install Pardus as you wish, but don't erase the first two partition (first one is refit, second one macosx) and dont forget to install bootloader to pardus installed partition.
Configuring
You can use following settings. Some utils at the end of the file.
Key Settings
For Turkish Q Keymap you can use the following Xmodmap configuration;
keycode 116 = ISO_Level3_Shift keycode 115 = Super_L keycode 108 = Delete keycode 49 = less greater NoSymbol NoSymbol bar keycode 94 = quotedbl backslash keycode 204 = F13
Also for shortcuts you can use xbindkeys with the following configuration;
"setkeybright minus" Mod5 + F9 "setkeybright plus" Mod5 + F10 "setbright minus" Mod5 + F1 "setbright plus" Mod5 + F2
AirPort
With current madwifi you can use the AirPort ver well. But sometimes it gets "wifi: overrun FIFO errors";
Workaround :
# iwpriv ath0 bgscan 0
To start at boot add to /etc/conf.d/local.start
Sound Card
To get work your microphone you can use "mbp3" option with snd-hda-intel; edit /etc/modules.d/alsa and insert
options snd-hda-intel model=mbp3
and then restart the machine ..
Utils
You will need some utilities to use your MacBook Pro efficiently..
Keyboard Light Setting
You can use the following C code with gcc -o setkeybright setkeybright.c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#define TARGET "/sys/devices/platform/applesmc/leds:smc:kbd_backlight/brightness"
int limited(int inp) {
if (inp<0) return 0;
if (inp>255) return 255;
return inp;
}
int main(int argc, char *argv[]) {
int current,new;
char tempC[10];
FILE *fp = fopen(TARGET,"r");
fread(tempC,4,1,fp);
fclose(fp);
fp = fopen(TARGET,"w");
current=atoi(tempC);
printf("Current : %d\n",current);
if (argc==2) {
if (!strcmp(argv[1],"plus"))
new = limited(current + 10);
if (!strcmp(argv[1],"minus"))
new = limited(current - 10);
if (!strcmp(argv[1],"set") && argc==3)
new = limited((int)argv[2]);
printf("New : %d\n",new);
fprintf(fp,"%d",new);
}
else printf("Usage : %s plus or minus\n",argv[0]);
fclose(fp);
return 0;
}
LCD Backlight Settings
You can use the following C code with gcc -O2 -o setbrigth setbright.c
#include <stdio.h>
#include <sys/io.h>
#include <stdlib.h>
#include <string.h>
int limited(int inp) {
if (inp<0) return 0;
if (inp>15) return 15;
return inp;
}
int main(int argc, char *argv[]) {
int new;
if (ioperm(0xB2, 0xB3, 1) < 0) {
perror("ioperm failed (you should be root).");
exit(1);
}
outb(0x03, 0xB3);
outb(0xBF, 0xB2);
char t = inb(0xB3) >> 4;
new = t;
printf("Current: %d\n",new);
if (argc >= 2) {
if (!strcmp(argv[1],"minus"))
new = limited(t - 1);
if (!strcmp(argv[1],"plus"))
new = limited(t + 1);
if (!strcmp(argv[1],"set") && argc == 3)
new = limited(atoi(argv[2]));
printf("New: %d\n",new);
outb(0x04 | (new << 4), 0xB3);
outb(0xBF, 0xB2);
}
else printf("Usage : %s plus or minus\n",argv[0]);
return 0;
}
