Making changes in order to make this page suitable for Pardus 2009.

Contents 1 Configuration of network between Pardus and WindowsXP 1.1 Introduction 1.2 Setup of Pardus 1.2.1 Pardus 2009 1.2.2 Pardus 2008 1.3 Setup of Windows 1.4 Access from PardusPC to shared folder in WinPC 1.5 Access from WinPC to shared folder in PardusPC 1.6 Making /home/samba (share) writable 1.7 Configuration of printer in Pardus 1.8 A network with more than one PardusPC 1.9 Access from PardusPC to shared folder(/home/samba) on the other PardusPC 1.10 Making your Home directory readable on the network

Configuration of network between Pardus and WindowsXP

Introduction

This is a manual about configuring a network between computers after a new installation of Pardus and WindowsXP Professional (+SP2).

Both computers are connected to a router or a switch.

[Apply] = activate the [Apply] button or select [this text].

{text} = the text in a window.

Setup of Pardus

Pardus 2009

[System Settings]>[Service Manager]
      if not green flag at samba: put cursor on samba > check mark at "Run on start' > Activate [Start service] (flag turns green).

[System Settings]>[Firewall Manager]
      if "Firewall is activated" check that there is no mark at "Block Incoming Connections"

[System Settings]>[Network Manager]
      make a note of the IP address
or
[System Settings]>[Advanced]>[Samba]
      make a note of the "NetBIOS name:"

Pardus 2008

[Tasma]>[System]>[Service Manager]
      Select [SMB Network Sharing].
      Put a mark at {Run on startup} and activate the green (Start)button.
      In the column {Run on Startup} {Yes} should be shown.
      [Back].
[Internet & Network]>[Firewall Config] 
      [Start Firewall] (if not already running)
      Put a mark at {Windows file sharing service}
      [Apply]>[Back]
[Samba]>[Base Settings] 
      Make a note of the {NetBIOS name:} (this is referred to as NetBIOSnamePardusPC)
      [Back]

As a default the /home/samba directory is configured as a shared directory. This directory will be readable from WinPC. Making this directory writable from WinPC will come later in this manual. As this directory is empty after a new installation, it is advisable to put a (image)file in this directory.

Setup of Windows

[start]>[Control Panel]>[Network Connections]>[Network Setup Wizard]
      Check mark at {Yes, use the existing shared connection for this computer's Internet access(recommended)}
      Make a note of the {Computer name:} (this is referred to as ComputernameWinPC)
      Put a mark at {Turn on file and printer sharing}
      {To apply these settings, click Next}
      Put a mark at {Just finish the wizard; I don't need to run the wizard on other computers}

If you have Sygate firewall:

Open Sygate firewall >[Tools]>[Options...]>[OK]>[Network Neighborhood]
      Select Network Interface (with multiple interface cards)
      Put a mark at {Allow others to share my files and printer(s)}
      [OK]

After this a restart of the computer is required.

Access from PardusPC to shared folder in WinPC

[Home] and enter at {Location:}

smb://ComputernameWinPC (+ enter).

or

smb://IP.address.of.the.remote.site (+ enter).

(for ComputernameWinPC see [start]>[Control Panel]>[System]>[Computer Name]>{Full computer name}

It is possible to make a Link to Location (URL)... with {smb://...........} on your Desktop.

Access from WinPC to shared folder in PardusPC

[start]>[My Computer] and enter at {Address:}

\\NetBIOSnamePardusPC (+ enter).

or

\\IP.address.of.the.remote.site (+ enter).

(for NetBIOSnamePardusPC see [Pardus]>[Tasma]>[Samba]>[Base Settings]>{NetBIOS name:})

Making /home/samba (share) writable

[Pardus]>[Tasma]>[Internet & Network]>[Samba]>[Administrator Mode]>{enter administrator password +[OK]}
   and {Loading..} appears
   [Shares]>select {share}>[Edit Share...]
   Remove the mark at {Read only}
   [OK]>[Apply]>[OK]

And to activate this change:

[System]>[Service Manager]	 
 Select [SMB Network Sharing] and activate [Stop] and then [Start]	 
[Back]

Configuration of printer in Pardus

This is valid when the printer is connected to WinPC.

[Pardus]>[Tasma]>{Peripherals]>[Printers]>{Add}>{Add Printer/Class...}
[Next >]
[SMB shared printer (Windows)]
[Next >]
{Guest account (login="guest")}
[Next >]
[Scan] fold out scanresult and select de printer 
[Next >]
Select the {Manufacturer} and {Model}
[Next >]
Select the recommended driver (if not working select the simplified version)
[Next >] 
Test the printer
[Next >] (3x)
Supply a name for the printer 
[Next >] (2x) [Back] and close Tasma

A network with more than one PardusPC

For this to function properly it is required that all {Workgroup:} and {NetBIOS name:} are different.

See [Pardus]>[Tasma]>[Internet & Network]>[Samba]>[Base Settings]

Access from PardusPC to shared folder(/home/samba) on the other PardusPC

[Home] and enter at {Location:}

smb://NetBIOSnamePardusPC(of the other PardusPC) (+ enter).

or

smb://IP.address.of.the.remote.site (+ enter).

It is possible to make a Link to Location (URL)... with {smb://..................} on your Desktop.

Making your Home directory readable on the network

[Pardus]>[Tasma]>[Internet & Network]>[Samba]>[Administrator Mode]>[Shares]>[Add New Share...]
 in {Add/Edit Share} [Open file dialog] and select your /home/your_login_name directory >[OK]
Enter a name at {Name:}
Check/put mark at {Read only}{Public}{Browseable}{Available}
[OK]
[Apply]>[OK]

And to activate this change:

[System]>[Service Manager]	 
 Select [SMB Network Sharing] and activate [Stop] and then [Start]	 
[Back]

Open Home (Personal files), go[UP] to /home level, rightclick on your_login_name and select {Properties}

 [Permissions]>[Advanced Permissions]
 Check/put mark at {Show Entries} for {User}{Group}{Others}>[OK]
 Put a mark at {Only owner can rename and delete folder content} 
           and {Apply changes to all subfolders and their content}
 [OK]