Revision as of 13:21, 6 July 2008 (view source) Atolboo (Talk | contribs) (→Pardus 2008.x) ← Older edit		Revision as of 13:25, 6 July 2008 (view source) Atolboo (Talk | contribs) (→Installing Grub) Newer edit →
Line 41:		Line 41:
	Check for the Pardus partition number by looking for disk format ext3 or ext2fs.		Check for the Pardus partition number by looking for disk format ext3 or ext2fs.
−	In our example it's in '''4'''th partition. Change it when necessary.	+	In our example partition number 4 is selected. Change it when necessary.
	* Write root (hd0,'''4)''' and press Enter. ( 4 is your Pardus partition as mentioned at previous item )		* Write root (hd0,'''4)''' and press Enter. ( 4 is your Pardus partition as mentioned at previous item )
	* Write '''setup (hd0)''' and press Enter.		* Write '''setup (hd0)''' and press Enter.

---

Revision as of 13:25, 6 July 2008

Contents 1 Introduction 2 What do we need ? 3 Enter The Grub Menu 3.1 Pardus 2007.x 3.2 Pardus 2008.x 4 Installing Grub 5 Tips 5.1 Delete Grub

Introduction

A (re)installation of Windows will overwrite the Grub bootloader.

This is a manual to restore Grub without a new installation of Pardus.

What do we need ?

• We need the Pardus Live or Installation CD

If you haven't any Pardus CD. Check: http://www.pardus.org.tr/eng/products/index.html

• Configure your bios settings for booting from CD

Enter The Grub Menu

Pardus 2007.x

• Reboot from CD and wait untill the language screen is shown.

• Push the arrow-down key to stop the timer.

• Push the c key and the grub screen will appear.

Pardus 2008.x

• Boot from the Pardus 2008 (Kurulan) installationCD and select the English (US) language.
• When the "Welcome !!" (license) screen is shown press Ctrl+Alt+F1.
• A console screen will appear with "pardus ~ #" as the last line.
• Write grub at the console, then press Enter and the grub screen will appear.

Installing Grub

• Type root ( and press Tab key. ( there is a blank between root and ( ). This will list your possible disks (hd0 hd1).

  When there is only one disk installed the filling up of 'root ( +Tab' will be 'root (hd0,' 
  and no disk selection is necessary (in this case skip the next step).

• Select the disk by adding 0, or 1,. In this example I will select hd0.
• Press after root (hd0, or root (hd1, the Tab key. This will list your partitions in hd0/hd1.

  Check for the Pardus partition number by looking for disk format ext3 or ext2fs. 
  In our example partition number 4 is selected. Change it when necessary.

• Write root (hd0,4) and press Enter. ( 4 is your Pardus partition as mentioned at previous item )
• Write setup (hd0) and press Enter.

  When we get 'Error 15: File not found" it is not the correct partition and we can start at 'Type root (' again, 
  and when we get "...... succeeded. Done." Grub has been restored in MBR of hd0.

• Press Ctrl + Alt + Del to restart your PC.
• You must see Grub Menu now.

Tips

Delete Grub

If the Grub installation failed, you can not access neither Pardus nor Windows. In such a scenerio you can delete Grub and get in Windows. Reboot your PC from a Windows Cd. Then press R ( restore ) button on installation screen. Select your installed Windows. And write this command:

FIXMBR

Press Enter. Answer all the question as y ( yes ). You're done. Just restart your pc.